Overview - Vacuum Pump, 2.0L TFSI Engine

Fig 1: Exploded View Of Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of AUDI

Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.0L TFSI ENGINE .
Seal
- Replace after removing
Vacuum Hose
Bolt
- Replace after removing
- 8 Nm +180°
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to the appropriate Service Information. .
High Pressure Pump
- Removing and Installing. Refer to the appropriate Service Information. .
O-Ring
- Replace after removing