Brake Caliper Piston, Removing And Installing: Removing
- The brake caliper is removed. Refer to BRAKE CALIPER, REPLACING .
- The parking brake motor is removed. Refer to Left Parking Brake Motor -V282- /Right Parking Brake Motor -V283-, REMOVING AND INSTALLING .
-- Turn the spindle with a XZN 9 Socket -item A- in the -direction of the arrow a-. This allows the thrust nut to push the brake caliper piston -3- out of the brake caliper -1-.
-- Carefully pry the protective cap -4- out of the groove -arrow- on the front brake caliper piston -3-.
-- Carefully pry the inner sealing lip of the protective cap -4- out of the groove -arrows- on the brake caliper -1-.
-- Remove the brake caliper piston -3-. To do so, use the Trim Removal Wedge:3409 .
-- Pry out the seal -2- from the brake caliper -1- carefully using the Trim Removal Wedge:T10498 .