Overview - Bumper Carrier, RS 4 And RS 5

Fig 1: Exploded View Of Bumper Carrier (RS4 & RS5)

Courtesy of AUDI

Bolt
- Replace after removing
- Quantity: 6
- Tightening specification Refer to Figure.
Foam Seal
- Left
Bracket
- For central valve
- Left
Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
Central Valve
- Left
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
Nut
- Tightening specification Refer to Figure.
Central Valve
- Right
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
Bracket
- Right
- For central valve
Foam Seal
- Right
Bumper Carrier
- Removing and Installing. Refer to BUMPER CARRIER, REMOVING AND INSTALLING, VEHICLES WITHOUT TRAILER HITCH .