Guidelines For Clean Working Conditions
- Thoroughly clean connection points and their surrounding areas with engine or brake cleaner before loosening and allow the cleaned connection points to dry completely.
- Clean the transmission and transmission components using Cleaning Solution -D 009 401 04-.
- Use lint-free cloths when cleaning, for example, the "X70 /" cloth made by Kimberly-Clark Professional.
- Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set:VAS6122 .
- Place the removed parts on a clean surface and cover them. Use foil and paper. Use lint-free cloths.
- Carefully cover or seal opened components if the repair will not be done immediately.
- Only install clean parts: remove the replacement parts from their packaging just before installing them.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.