LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing (Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL) (Convertible) >> 34 Controls, Housing >> Transmission Housing And Clutch Housing >> Overview - Transmission Housing

Overview - Transmission Housing

Fig 1: Exploded View Of Transmission Cover
GWWA34-11695Courtesy of AUDI OF AMERICA, LLC
  1. Circlip
  2. Pinion Roller Sleeve
    • Bearing "I"
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  3. Transmission Housing
  4. Seal
  5. Cap
    • Replace after removing
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  6. Fluid Catch Tray
    • Replace after removing
  7. Input Shaft Ball Bearing
    • Bearing "E"
    • Installation position: the surrounding groove points to the transmission housing.
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  8. Circlip
    • Installation position. Refer to Figure
  9. Roller Sleeve for the Output Shaft
    • Bearing "F"

      FWD Vehicles

    • Replace after removing
    • Removing. Refer to Figure.
    • Installing. Refer to Figure.

      AWD Vehicles

    • Removing. Refer to Figure.
    • Installing. Refer to Figure.
  10. Circlip
    • Different versions
    • Refer to the appropriate Electronic Parts Information for the allocation.
scientia non olet · About LEMON Manuals