Clutch Housing, Servicing: Notes

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Puller - Grease Cap:VW637/2 
• Hot Air Blower:V.A.G 1416  or Wiring Harness Repair Set - Hot Air Blower: VAS 1978/14A 
• Bearing Installer - Wheel Bearing:3144 
• Seal Installer - Gearbox:3295 
• Puller - Crankshaft/Power Steering Seal:T20143 
• Counterhold Tool:T10114 

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Bearing Installer - Wheel Bearing/Ball Bearing:3074 
• Bearing/Bushing Installer - Multiple Use:VW295 
• Press Piece - Output Shaft Gear/Final Drive Gear:3002 
• Subframe Bushing Tool Kit:3301 
• Press Piece - Trailing Arm:2010 
• Inductive Heater:VAS 6414 

Special tools and workshop equipment required 

• Puller (Kukko 18/2):VAS 251 419 

  Courtesy of AUDI OF AMERICA, LLC

• Internal Puller:VAS 251 615 

  Courtesy of AUDI OF AMERICA, LLC

• Counter Support:VAS 251 623 
  Fig 1: Counter Support

  Courtesy of AUDI OF AMERICA, LLC
• Circlip Pliers:VAS 211 009