Wheel Bearing Unit, Removing And Installing, Fwd: Removing

-- Remove the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .

-- Loosen the dust cap from the seat by tapping lightly on the claw of the Puller - Grease Cap:VW 637/2  -1-.

Fig 1: Removing Dust Cap (1 Of 2)

Courtesy of AUDI OF AMERICA, LLC

-- Dismount the dust cap using the Puller - Grease Cap:VW637/2  -1-.

Fig 2: Removing Dust Cap (2 Of 2)

Courtesy of AUDI OF AMERICA, LLC

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the wheel bearing unit -1- from the axle stub.

• Handling the wheel bearing. Refer to Figure.

-- Remove the metal washer -2- and front seal -1- from the axle stub -arrow-.

Courtesy of AUDI OF AMERICA, LLC