Threshold "A" In Mm, Sedan / AVANT
NOTE:
If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.
If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.
| Chassis | Front Axle | Rear Axle | Note |
|---|---|---|---|
| 1BA | 43 | 46 | no load tank full |
| 1BE | 48 | 49 | |
| 1BR | 43 | 43 | |
| 1BB | 47 | 52 | |
| 1BD | 43 | 49 | |
| 1BL | 50 | 63 | |
| 1BM | 47 | 48 | |
| 1BP | 44 | 45 | |
| 1BQ / 2MV | 54 | 62 | |
| 2MN | -- | -- | |
| 2MC / 2MS | -- | -- | |
| 2MD | -- | -- |