Overview - Seat Position Sensor

NOTE:

The front passenger side is shown.

Fig 1: Exploded View Of Seat Position Sensor

Courtesy of AUDI OF AMERICA, LLC

Wiring Harness
- Seat position sensor/passenger occupant detection sensor/seat belt switch
- Clip into the seat pan
- Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
Passenger Seat Occupant Detection Sensor -G128-
- Only the front passenger side
- Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING
- Push into the seat pan until they click into place
Passenger Occupant Detection Sensor Bracket
- Clip into the seat pan
- Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING
Seat Belt Latch Connector Coupling
Seat Rail
- Tunnel-side
Seat Position Sensor
- Driver Seat Position Sensor -G553-
- Front Passenger Seat Position Sensor -G554-
- Adjusting. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
Bolt
- 1.6 Nm