Seat Occupant Detection System, Removing And Installing: Notes

• The seat occupant detection system is only installed in the front passenger seat.
• The service kit for the passenger occupant detection system must always be installed completely.
• This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and the passenger occupant detection system) must always be installed.
• Interchanging one of the components Passenger Occupant Detection System Control Module -J706- or the passenger occupant detection system with another vehicle is not permitted.
• The parts of the service kit are different depending on the seat version. Refer to the appropriate Electronic Parts Information.

Special tools and workshop equipment required 

• Pry Lever:80-200 
  Fig 1: Identifying Pry Lever

  Courtesy of AUDI OF AMERICA, LLC