Component Location Overview - Seat Occupant Detection System

NOTE:

For the seat heating element is used for the seat occupant detection system.

Fig 1: Exploded View Of Passenger Occupant Detection System

Courtesy of AUDI OF AMERICA, LLC

Wiring Harness
- For the seat position sensor/seat belt fastening detection/seat belt switch
- Clip into the seat pan
- Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
Wiring Harness
- For the seat heating element with seat occupant detection system
- Clip into the seat pan
- Refer to SEAT OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING
Seat Occupant Detection System Control Module -J706-
- Refer to SEAT OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING
Bolt
- 1.5 Nm
Control Module Bracket
- Clip into the seat pan
Seat Occupant Detection System
- The seat heating element is used for the seat occupant detection system
- Depending on the seat version, the passenger occupant detection system is either sewn into the cover with the seat heating element, or bonded onto the seat cushion
- Refer to SEAT OCCUPANT DETECTION SYSTEM, REMOVING AND INSTALLING
Nut
- 1.5 Nm
Front Passenger Seat Position Sensor -G554-
- Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
Bolt
- Tightening Specification. Refer to OVERVIEW - SEAT POSITION SENSOR.