Overview - Transmission Mount for Automatic Transmission, Audi Q7/Q8

Fig 1: Exploded View Of Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
2. Tunnel Crossmember
   • Removing and Installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
3. Stop
   • For the rear transmission mount
4. Rear Transmission Mount
   • Removing and Installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING, VERSION 2 .
5. Nut
   • Only remove when the transmission mount must be separated from the transmission support
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
6. Bolt
   • Only remove when the transmission mount must be separated from the transmission support
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
7. Transmission Support
   • Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
8. Bolt
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
9. Bolt
   • Only remove when the transmission mount must be separated from the transmission support
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
10. Nut
    • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .