Overview - Dual Clutch Transmission Mount, Version 2

Fig 1: Exploded View Of Dual Clutch Transmission Mount, Version 2

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
2. Tunnel Crossmember
   • Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
3. Bolt
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
4. Stop
   • For the transmission mount
5. Transmission Mount
   • Removing and Installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING, VERSION 2 .
6. Nut
   • Only remove when the transmission mount must be separated from the transmission support
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
7. Bolt
   • Only remove when the transmission mount must be separated from the transmission support
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
8. Transmission Support
   • Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
9. Bolt
   • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
10. Nut
    • Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .