Overview - Backrest Cover And Cushion, Standard Seat/Sport Seat

Fig 1: Exploded View Of Backrest Cover And Cushion, Standard Seat/Sport Seat

Courtesy of AUDI

1. Clip
   • Quantity: 2
2. Cover Tab
   • Sewn into cover
   • To tension the cover secured to the backrest frame
3. Backrest Hinge Cover
   • Sewn into cover
   • To attach to the backrest frame
4. Cover
   • Covers and Cushions, Removing and Installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
   • Cover and Cushion, Separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
   • Check that there are no folds after installing
5. Upholstery Clip
   • For securing the cover to the cushion
   • Replace after removing
   • Install at the same location with Upholstery Clip Pliers:V.A.G 1634  .
6. Cushion
   • Covers and Cushions, Removing and Installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
   • Cover and Cushion, Separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
   • Versions with seat heating: attach a new heating element when replacing. Refer to BACKREST HEATING ELEMENT, REMOVING AND INSTALLING .
7. Molding
   • Sewn into cover
   • For attaching the cover to the backrest frame
   • Check for proper seating
8. Backrest Hinge Cover
   • Sewn into cover
   • To attach to the backrest frame
9. Molding
   • Sewn into cover
   • For attaching the cover to the backrest frame
   • Check for proper seating