Backrest Cover And Cushion, Removing And Installing, Super Sport Seat: Removing
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Secure the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS 6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the tunnel-side seat side trim. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING, EXCLUDING BUCKET SEAT .
-- Remove the backrest cover and side trim. Refer to BACKREST COVER, REMOVING AND INSTALLING, SUPER-SPORT SEAT .
-- Remove the front thorax airbag. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING, SUPER SPORT SEAT .
-- Disengage the anti-squeak fleece on the backrest frame.
-- Remove the clips -arrows- on the backrest frame with the Pry Lever:80-200 .
-- Detach the lower molding -1- from the backrest frame.
-- Disengage the molding -2- on the bracket on the backrest frame.
-- Remove the clips -arrows- on the side bolster with the Pry Lever:80-200 .
-- Disengage the clamping strip -1- for the cover from the headrest.
-- Disengage the tab -1- from the cushion and cover on both sides from the hooks for the side bolster -2-.
-- Disengage the left and right cover hooks -3- on the backrest frame.
-- Equipped on some models: disconnect the backrest heating wiring harness from the seat pan and free it up.
-- Loosen the cover -1- with cushion -2- from the backrest frame and remove carefully under the backrest forward -arrows-.
-- Remove the cushion and cover from the backrest frame, depending on the version guide the wiring harness for the backrest heating.