Rear Seat Backrest, Removing And Installing, A5 Cabriolet: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
CAUTION:
Risk of damaging the rear seat backrest.
- To reduce the risk of pressure marks in the cover and cushion, the front mounts -arrow- for the bench seat must be covered with the Universal Vehicle Protector:VAS 871 001 .
-- Remove the cover -1- for the center support forward -arrows- from the center support to do this release the rear seat backrest and tip it slightly forward.
-- Fold the rear seat backrests forward.
-- Release the clips -2- from the center support with a screwdriver.
-- At the same time pry out the rear seat backrest -1- from the center support -arrow A-.
-- Remove the rear seat backrest from the outer mounting -arrow B- toward the center of the vehicle and then remove it from the vehicle.