Front Seat Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move seat depth adjuster forward.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- If installed, remove the fire extinguisher bracket. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
-- Release the hooks -arrows- on the front seat trim -1-.
-- Disengage the front seat trim -1- downward -arrows-.
-- If necessary, release the retainer -1- using a flat-head screwdriver and remove the seat depth adjuster handle -2- from the handle mount -arrow-.