Seat Height Adjustment Handle, Removing And Installing, Bucket Seat: Removing

Courtesy of AUDI

-- Pull the seat height adjustment handle -1- upward and hold in this position.

-- Guide the commercially available screwdriver between the handle -1- and seat trim panel -2- up to the clip -3-.

-- Press down the clamp hooks -3- using the screwdriver.

-- Remove the seat height adjustment handle -1- in -direction of the arrow- from the seat height adjustment lever -4-.

-- To remove the seat height adjustment operating lever -1-, remove the seat frame trim panel on the side sill side.

Courtesy of AUDI

-- Seat Frame Trim Panel Bracket, Removing:

-- Remove the bolts -2- and remove the operating lever.