LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (Seat Frames (Coupe)) >> 72 Seat Frames >> Front Seats >> Backrest Cover, Removing And Installing >> Backrest Cover, Removing And Installing, Super-Sport Seat >> Removing

Backrest Cover, Removing And Installing, Super-Sport Seat: Removing

WARNING: This page is about a different variant/trim than selected.
GWWA72-11844Courtesy of AUDI

-- Move the front seat all the way forward into the lowest position and move the backrest toward the front.

CAUTION:

There is a risk of damaging the side trim.

  • The side trim can be damaged relatively easily. Counterhold when removing and installing the side trim.

-- Pull the backrest cover and at the same time counterhold the side trim to unclip the backrest cover -2- starting at the top from the side trim -1- -arrows A to D-.

NOTE:

If it is difficult, loosen the catches using the Wedge Set:T10383  .

-- Disengage and remove the backrest cover from the headrest out of the hooks.

Remove the side trim:

GWWA72-11845Courtesy of AUDI

-- Remove the bolts -3-.

NOTE:

If the bolts -3- cannot be removed. Loosen the guide plate for the thorax airbag. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING, SUPER SPORT SEAT .

-- Remove the side trim -1- downward from the side bolster -2- -arrow- and remove.

-- Disconnect the connector, to do this press the release.