LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (Seat Frames (Coupe)) >> 72 Seat Frames >> Front Seats >> Backrest Cover, Removing And Installing >> Backrest Cover, Removing And Installing, Standard/Sport Seat >> Removing

Backrest Cover, Removing And Installing, Standard/Sport Seat: Removing

WARNING: This page is about a different variant/trim than selected.
GWWA72-12239Courtesy of AUDI

-- Move the front seat all the way forward and up.

-- Fold the backrest forward.

-- Grasp on the backrest cover lower edge with both hands pull upward using force and at the same time remove rearward from the hooks -arrows-.

-- At the same time the lower hooks -A arrows- are disengaged from the backrest frame, if necessary use the Pry Lever:80-200  .

GWWA72-11966Courtesy of AUDI

-- Pull the backrest cover by hand toward the rear with force which causes the side hooks -B arrows- to release from the backrest frame.

-- Push a flat-head screwdriver between the cushion and cover, as shown.

GWWA72-11967Courtesy of AUDI

-- Push the cushion to the side, disengage the hook -arrow A- and hooks -arrow B- with a screwdriver and at the same time pull the backrest cover downward from the catches.

-- Repeat the procedure for the hook on the opposite side.

-- Pull the backrest cover downward from the backrest frame catches -arrows- and remove.

GWWA72-12240Courtesy of AUDI