Overview - Seat Position Sensor
WARNING: This page is about a different variant/trim than selected.
NOTE:
The front passenger side is shown.
- Wiring Harness
- Seat position sensor/passenger occupant detection sensor/seat belt switch
- Clip into the seat pan
- Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
- Passenger Seat Occupant Detection Sensor -G128-
- Only the front passenger side
- Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING
- Push into the seat pan until they click into place
- Passenger Occupant Detection Sensor Bracket
- Clip into the seat pan
- Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING
- Seat Belt Latch Connector Coupling
- Seat Rail
- Tunnel-side
- Seat Position Sensor
- Driver Seat Position Sensor -G553-
- Front Passenger Seat Position Sensor -G554-
- Adjusting. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Bolt
- 1.6 Nm