Rear Seat Belt Latch, Removing And Installing, A5 Cabriolet: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Open the tab -2- on the seat belt latch cover at the seal -arrow-.
-- Slide the tab under the seat belt latches upward and through.
-- Disengage the seat belt latch cover -1- and removed upward over the seat belt latches.
-- If equipped, disconnect the seat belt switch connectors -1 and 4-.
-- Remove the nut -3- and the bolt -2-.
-- Remove the seat belt latches -5-.