Center Console Insert, A5 Cabriolet
WARNING: This page is about a different variant/trim than selected.
- Bolt
- Quantity: 4
- 1.4 Nm
- Cupholder
- Refer to CUPHOLDER, REMOVING AND INSTALLING
- Bolt
- Quantity: 4
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Center Console Insert
- Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING
- Replace damaged or deformed clips
- Press on until it engages audibly
- Emergency Release Cover
- Engage in the cupholder and press on it until it engages audibly
- Cupholder Trim
- Multimedia System Control Head -E380-
- Component Location Overview. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .
- Center Console Insert Decorative Trim
- Refer to CENTER CONSOLE INSERT DECORATIVE TRIM, REMOVING AND INSTALLING
- Replace damaged or deformed clips
- Press on until it engages audibly
- Mount
- For Convertible Top Operation Switch -E137-
- Refer to CENTER CONSOLE DECORATIVE TRIM, REMOVING AND INSTALLING
- Engage in the decorative trim and press on it until it engages audibly
- Center Console Decorative Trim
- Refer to CENTER CONSOLE DECORATIVE TRIM, REMOVING AND INSTALLING
- Replace damaged or deformed clips
- Press on until it engages audibly
- Driver Volume Control -E67-
- Component Location Overview. Refer to DRIVER VOLUME CONTROL -E67-, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Selector Lever Transmission Range Display -Y5-
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - CENTER CONSOLE LAMPS .
- Bolt
- 1.5 Nm
- Bolt
- Quantity: 4
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - CENTER CONSOLE LAMPS .
- Bolt
- Quantity: 2
- 1.4 Nm