Overview - Fuel Tank, TFSI AWD Vehicles Rest Of World Market Version

Fig 1: Fuel Tank, TFSI AWD Vehicles Rest Of World Market Version

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 20 Nm
2. Mounting Strap
   • Secured to the fuel tank with expanding clips.
3. Fuel Line
   • To the engine
   • Do not kink
   • Clipped to the fuel tank
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
4. Bolt
   • 20 Nm
5. Bolt
   • Secures the fuel filler neck and works at the same time as the ground connection
     • A4: quantity 2
     • A5: quantity 3
   • 8 Nm
6. Cap
   • Attached to the fuel filler door unit with fastener
   • Turn until it clicks into place.
7. Bleeder Line
   • To the EVAP Canister
   • Do not kink
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
8. Bushing
9. Rubber Bushing
10. Bolt
    • 20 Nm
11. Mounting Strap
    • Secured to the fuel tank with expanding clips.
12. Heat Shield
    • For the fuel tank
13. Fuel Tank
    • There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
    • Removing and installing. Refer to FUEL TANK, REMOVING, TFSI VEHICLES .
14. Bolt
    • 20 Nm
15. Mounting Strap
    • Secured to the fuel tank with expanding clips.
16. Bolt
    • 20 Nm
17. Spring Nut
    • For the heat shield
    • Quantity: 5
    • 2 Nm
18. Bolt
    • 20 Nm