Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Pay attention to the safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Reach through the installation opening in the fuel tank, release the catch -2- -arrow A- and at the same time, remove the Fuel Level Sensor -G- -item 1- from the mount on the baffle housing -arrow B-.
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when removing.
Take care when removing the Fuel Gauge Sensor -G- to make note of the position it was removed.
-- Carefully remove the Fuel Level Sensor -G- from the fuel tank opening.