Overview - EVAP System, Vehicles Without Tank Leak Diagnosis

NOTE:

The overview only applies to TFSI vehicles.

Fig 1: EVAP System, Market-Specific Rest Of World

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • Quantity: 3
   • 8 Nm
2. Nut
   • Quantity: 2
   • 20 Nm
3. EVAP Canister
   • Component location: right rear
   • Removing and installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING, VEHICLES WITHOUT TANK LEAK DIAGNOSIS .
4. Bleeder Line
   • From the fuel tank
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
5. Vent Line
   • Vents out to the right rear under the wheel housing liner
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
6. Bleeder Line
   • To the EVAP Canister Purge Regulator Valve 1 -N80-
   • Connector Couplings, Disconnecting and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
   • Clipped to the underbody
7. Bracket
8. Bolt
   • 20 Nm