Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
- Follow the guidelines for clean working conditions. Refer to the appropriate Service Information.
All except Audi A8/Q7/Q8:
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
Audi A4/A5:
-- Remove the bolts -arrows- and the air duct -2- from the lock carrier.
Audi A6/A7:
-- Remove the bolts -arrows- and air duct -1-.
Audi Q5:
-- Remove the bolts -arrows- and air duct -1-.
Audi Q7/Q8:
-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .
Vehicle with high-voltage system:
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Continuation for All Vehicles:
-- Disconnect the connector -1-.
-- Remove the bolts -arrows- and the Turbocharger Recirculation Valve -N249-.