Transmission Coolant Pipes, Removing And Installing, Vehicles With Dual Clutch Transmission: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Fill the cooling system. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS 6096 [DMTA, DPAA, DPUA, DPVA, DMTC, DRYA, DUVA] .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .