Cam Adjustment Actuator, Removing And Installing: Notes

Removing

All except Audi Q7/Q8:

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Audi Q7/Q8:

Refer to the appropriate Service Information.

-- Remove the cap -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -arrow B- and remove the oil filler tube -1- upward from the air filter lower section.

-- Turn the oil filler tube counter-clockwise -arrow A- and remove it.

-- Close the oil filler tube with the cap.

Continuation for All Vehicles:

-- Cam Adjustment Actuator 1 -F366- : free up the wires and slightly push to the side.

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the cam adjustment actuator.