Flywheel, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

The engine/transmission removed and separated on the scissor lift table. Refer to ENGINE AND TRANSMISSION, SEPARATING .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damaging the dual mass flywheel due to improper handling.

- When loosening or tightening the bolts do not damage the multi-points of the dual mass flywheel.

-- Remove the bolts -arrows- and then remove the dual mass flywheel -1-.

-- To do so, use the Wrench - 21mm:T40263 , Adapter:T40314 and 24mm socket to counterhold the vibration damper.

Fig 1: Using T40263 & T40314

Courtesy of AUDI OF AMERICA, LLC