Speaker Trim In Door Trim Panels, Removing And Installing

Special tools and workshop equipment required 

• Pry Lever:80-200 
  Fig 1: Identifying Pry Lever

  Courtesy of AUDI

Bass Speaker Trim in Front Door, Removing

Fig 2: Front Bass Speaker Trim

Courtesy of AUDI

-- Speaker trim with ambient lighting: remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- If installed, remove the lamp for the ambient lighting in the rear on the speaker trim to do so release the catches and remove the lamp from the fiber-optic cable.

-- Carefully pry out the speaker trim -1- along the door trim panel seam using the Pry Lever:80-200  -arrow A-.

-- To do so release the catches on the door trim panel.

-- Disengage the speaker trim at the rear from the door trim panel -arrow B- and remove.

Bass Speaker Trim in Rear Door, Removing

Fig 3: Rear Bass Speaker Trim

Courtesy of AUDI

-- Carefully pry out the speaker trim -1- along the door trim panel seam using the Pry Lever:80-200  -arrow- and remove it.

Treble Speaker Trim in Rear Door, Removing

Fig 4: Rear Treble Speaker Trim

Courtesy of AUDI

-- Carefully pry the speaker trim -1- out of the door trim panel using the Pry Lever:80-200  -arrow- and remove it.

Installing

Install in the reverse order of removal while noting the following:

Installation instructions: tightening specifications, replacing body parts. Refer to OVERVIEW - FRONT DOOR TRIM PANEL  and Refer to OVERVIEW - REAR DOOR TRIM PANEL .