Overview - Rear Lid Trim Panel, A5 SPORTBACK
WARNING: This page is about a different variant/trim than selected.
- Clip
- On the side, quantity: 6
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Protective Cap
- Quantity: 2
- Mount for Luggage Compartment Cover
- Quantity: 2
- Expanding Clip
- Quantity: 2
- Removing with Pliers:T40172C
- Tail Lamp Cover
- Quantity: 2
- Refer to TAIL LAMP COVER, REMOVING AND INSTALLING
- Clip into the rear lid trim panel
- Press on until it engages audibly
- Clip
- Quantity: 12
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rubber Buffer
- Quantity: 7
- Insert in the trim panel
- Rear Lid Latch Trim Panel
- Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING, A5 SPORTBACK
- Press on until it engages audibly
- Rear Lid Lower Trim Panel
- Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING, A5 SPORTBACK
- Press on until it engages audibly
- Emergency Release Cover
- Unclip using the Trim Removal Wedge:3409
- Clipped in the rear lid trim panel
- Press on until it engages audibly
- Rear Lid Upper Trim Panel
- Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING
- Press on until it engages audibly
- Rubber Buffer
- Quantity: 4
- Insert in the trim panel
- Clip
- Top, quantity: 5
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips