Center Vent, Removing And Installing: Removing
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the light switch trim. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .
-- Remove the A/C display control head trim. Refer to DISPLAY CONTROL HEAD TRIM, REMOVING AND INSTALLING .
-- Move the steering wheel as far to the rear and down as possible. Use the full steering column adjustment range for this.
-- Using the Trim Removal Wedge:3409 , unclip the steering column trim panel gap cover -1- from the instrument panel vent -arrows-.
-- Remove the MMI screen cover. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
-- Remove the bolts -A arrows-.
-- Unclip the instrument panel vent -1- using the Trim Removal Wedge:3409 -arrow B-.
-- Disengage the remaining retainers, carefully remove the instrument panel vent and disconnect the connectors.