Rear Lid Tail Lamp, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn the light switch to position "0".
-- Remove the cover -1- from the tail lamp -2- in the direction of -arrows-.
-- Coupe, Cabriolet: release the cover -1- from the clips in the direction of -arrow- using the Trim Removal Wedge:3409 .
-- Sportback: pry off the cover -1- using the Trim Removal Wedge:3409 in the direction of in the direction of -arrow-.
-- Disconnect the connector -1-.
-- Remove the nuts -arrows-.
-- Remove the tail lamp.