Alcohol Interlock System - Manufacturing Of Wires
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Wiring Harness Repair Set:VAS 1978B
List of Materials
-- Use the following materials:
Glove Compartment Wire Routing Grommet 4B0 971 908 A
LIN Wire
| Component | Part Number | Number |
|---|---|---|
| Butt Connections Transparent | 000 979 940 | 1 |
| Repair Wire with Quick Disconnect Terminal 0.5 mm2 | 000 979 009 E | 1 |
| LIN Wire Yellow 0.35 mm2 | 000 979 980 A | Determine the required length in the vehicle |
Positive cable terminal 30
| Component | Part Number | Number |
|---|---|---|
| Butt Connector Blue | 000 979 942 | 1 |
| Repair Wire with Flat Terminal 2.5 mm2 | 000 979 227 E | 1 |
| Automotive Wire Red 2.5 mm2 | Commercially available | Determine the required length in the vehicle |
Ground wire terminal 31
| Component | Part Number | Number |
|---|---|---|
| Butt Connector Blue | 000 979 942 | 1 |
| Repair Wire with Ring Cable Terminal 2.5 mm2 | 000 979 230 E | 1 |
| Automotive Wire Brown 2.5 mm2 | Commercially available | Determine the required length in the vehicle |
Prepare Connecting Wires
-- Prepare connecting wires with Wiring Harness Repair Set:VAS 1978B . Refer to WIRING HARNESS AND CONNECTOR REPAIRS .