Shock Absorber, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.

NOTE:

Because of different shock absorber valve systems, only install new shock absorbers from the same manufacturer on both axles, if possible.

Special tools and workshop equipment required

Engine and Gearbox Jack:VAS 6931

Fig 1: Engine and Gearbox Jack VAS6931 or VAG1383A
Courtesy of AUDI
Support Device:VAS 6931/1 , not illustrated
Tensioning Strap:T10038

Fig 2: Identifying Tensioning Strap T10038
Courtesy of AUDI