LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 52 (Front Suspension (Coupe)) >> 40 Front Suspension >> Wheel Bearing >> Wheel Bearing Unit, Removing And Installing >> Installing

Wheel Bearing Unit, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .

-- Tighten the threaded connection between the drive axle and wheel hub. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .

scientia non olet · About LEMON Manuals