Suspension Strut, Removing And Installing, Excluding RS Competition: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
- Installation position. Refer to Figure.
-- Equipment versions with Dynamic Ride Control (DRC): fill the dynamic ride control system. Refer to DYNAMIC RIDE CONTROL (DRC), DRAINING AND FILLING .
After replacement of the shock absorbers:
- For the equipment version with electronic damping: perform the basic setting of the electronic damping function. Refer to ELECTRONIC DAMPING BASIC SETTING .
After replacing the struts:
- Adjust the headlamps. Refer to HEADLAMP, ADJUSTING .
- Driver Assistance Systems Front Camera, Calibrating. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .