Determining The Correct Tire Package Using The Version Key: Notes

WARNING: This page is about a different variant/trim than selected.

There Are Three Options for Determining the Tire Package Assigned to a Vehicle:

Using the version key in the certificate of registration part 1. Refer to CERTIFICATE OF REGISTRATION PART 1
Using the version key in the certificate of registration Part 2
Using the version key in the EG declaration of compliance (COC-paper). Refer to CERTIFICATE OF CONFORMITY (EG CERTIFICATE OF CONFORMITY) .

Breakdown of the version key in the certificate of registration part 1 under D2. Refer to CERTIFICATE OF REGISTRATION PART 1 .
Selecting a possible wheel/tire combination. Refer to WHEEL AND TIRE GUIDE, VEHICLE SPECIFIC PART .

Example:

1 - The displacement in cm³ is in the certificate of registration Part 1 under P.1 and the output in kW can be found under P.2; this shows which engine with which output is installed in the vehicle.

2 - The code e.g. RT01 is included in the version key for the tire package.

4 - With these three selection criteria it is possible to determine the wheel/tire combination of the actual vehicle. Refer to WHEEL AND TIRE GUIDE, VEHICLE SPECIFIC PART .