Minimum Curing Time For Bonded Sliding Sunroof
WARNING: This page is about a different variant/trim than selected.
- For safety reasons, use only non-conductive two-part adhesive when installing the sliding sunroof with the materials listed below.
- The vehicle can only be used after the minimum curing time has elapsed.
- During the minimum curing time, the vehicle must be resting at room temperature (at least 15 °C (59 °F)) on a level surface.
| Component | Adhesive | Minimum curing time in hours |
|---|---|---|
| Sunroof frame, glass trim | Two-Part Window Adhesive. Refer to the appropriate Electronic Parts Information. | 2 |