Brake Rotor, Removing And Installing, Ceramic Brakes: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

-- Before reusing ceramic brake rotors check for wear and damage. Refer to BRAKE ROTORS, CHECKING, CERAMIC BRAKES .

During the mounting pay attention to the side of the vehicle specified on the brake rotor "L" / "R" and the running direction "arrow".

-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.

-- Do not tilt the brake rotor when mounting it on the wheel hub.

-- Tighten the bolt.

-- Install the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, SIX-PISTON CERAMIC BRAKE .

CAUTION:

Faulty brakes increase the risk of an accident.

- Make sure the brakes are working correctly before driving the vehicle for the first time.

-- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.