Overview - Brake Pedal
WARNING: This page is about a different variant/trim than selected.
- Brake Pedal
- There are different versions. Refer to the the appropriate Electronic Parts Information for the allocation.
- The path of the brake pedal must not be shortened by extra floor mats
- Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER
- Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER
- Refer to BRAKE PEDAL, REMOVING AND INSTALLING
- Bolt
- Holds the mounting pin in place
- 8 Nm
- Clip
- Replace after removing
- Nut
- 8 Nm
- Mounting Bracket
- for foot pedal assembly
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
- Refer to MOUNTING BRACKET, REMOVING AND INSTALLING
- Clip
- Replace after removing
- Mounting Pin
- for brake pedal
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
- Bolt
- 20 Nm
- Pedal Rubber