Driveshaft Heat Shield, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the nuts -arrows- and bolt -2- for the underbody trim panel -1- in the heat shield area.
-- Remove the nuts -arrows-.
-- Remove the exhaust system clamping sleeve. Refer to OVERVIEW - MUFFLER (2.0L) , OVERVIEW - MUFFLER (3.0L) and OVERVIEW - EMISSIONS CONTROL SYSTEM (2.0L) , OVERVIEW - EMISSIONS CONTROL SYSTEM (3.0L) .
-- Free up the heat shield -1- from the stud bolts -arrows-.
-- Remove the heat shield from between the exhaust system -2- forward.