Requirements To Identify A Complaint

WARNING: This page is about a different variant/trim than selected.

Fault finding on the electrical equipment, vacuum system and air ducts has not revealed any faults. Use the Vehicle Diagnostic Tester in the A/C system "Guided Fault Finding" function (and the battery regulation) and refer to the appropriate Wiring Diagram and COOLING OUTPUT, CHECKING (vehicle-specific repair information).

The OBD in the A/C system "Guided Fault Finding" function (for example, using the Vehicle Diagnostic Tester in the A/C system "Guided Fault Finding" function) does not identify any fault status for a concern.
In the measured values for the A/C system control module, no shut-off condition for the A/C compressor is shown. Use the Vehicle Diagnostic Tester in the A/C system "Guided Fault Finding" function.