Thermal Management Control Module -J1024-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Switch off (deactivate) the "parking air conditioner". Refer to Owner's Manual.
-- Switch off the ignition.
-- Remove the left front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Release and disconnect the connector -4-.
-- Release the tab -arrow- and remove the control module -3- forward out of the bracket -1-.
-- To remove the bracket remove the expanding clips -2- on both sides and disengage the bracket and remove forward.