Hydraulic Pump, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Lift the luggage compartment floor.
-- Remove the storage compartment for the wind deflector.
-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
-- Press off the bracket -1- from the threaded pins.
-- Remove the tool box -4-.
-- Disconnect the connectors -2-.
-- Place the hydraulic pump -3- with the attached hydraulic lines toward the front.
-- Remove the adhesive strip -2-.
-- Remove the hydraulic pump -4- from the noise insulation -3-.
-- Remove the hydraulic lines. Refer to HYDRAULIC LINE ON VALVE BLOCK, REMOVING AND INSTALLING .