MOUNT WITH Convertible Top Locking Motor -V223-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

-- Position the mount -5- with the Convertible Top Locking Motor -V223- and install the bolts -arrows- all the way.

• The mount with the Convertible Top Locking Motor -V223- must be movable to align.

-- Install the ball socket -2- of the control rods on the ball pin.

-- Close the convertible top latch.

-- Tighten the bolts -arrows- on the mount -5- in the removed position using the Convertible Top Locking Motor -V223-.