Convertible Top Latch, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the mount with the convertible top locking motor. Refer to MOUNT WITH Convertible Top Locking Motor -V223-, REMOVING AND INSTALLING .
-- Mark the installation position of the convertible top latch -5- for reinstallation.
-- Disconnect the connector -1- and free up the wiring harness.
-- Using a small screwdriver, lift the locking spring -2- slightly and remove the ball socket -3- from the ball pin.
-- Remove the nuts -4 and 6- and the convertible top latch -5-.