Position : 3
WARNING: This page is about a different variant/trim than selected.
-- Open the convertible top until the displayed position of the convertible top -1- and the convertible top compartment cover -2- is reached.
- The convertible top compartment cover must have reached its end position.
-- Secure the convertible top compartment cover in the "open" position against unintentional closing.
-- Thread the two Tensioning Strap:T10038 into the Hooks:T40306 and turn the quick-action clamps three times on the shaft.
-- Engage the front and rear Hooks:T40306 in the center of the convertible top edge and adjust the tension if necessary.