Overview - Convertible Top Cover Tension And Guide Cable
WARNING: This page is about a different variant/trim than selected.
- Overview - Repair Kit Tension and Guide Cable. Refer to OVERVIEW - REPAIR KIT TENSION AND GUIDE CABLE .
- Pay attention to the difference regarding the routing of the tension and guide cables. Refer to OVERVIEW - REPAIR KIT TENSION AND GUIDE CABLE .
- Control 3
- For the convertible top cover
- Cannot be replaced separately
- Bolt
- 2 Nm
- Control 1
- For the convertible top cover
- Cannot be replaced separately
- Tension Cable
- For the convertible top cover
- Removing and Installing. Refer to CONVERTIBLE TOP COVER TENSION CABLE, REMOVING AND INSTALLING .
- Front Rail
- Rivet
- Guide Band 1
- For the "Bow 2 to 5"
- Guide
- For the seat belt webbing, tension and guide cable
- Rivet
- Quantity: 2
- Guide Band 2
- Guide Band 3
- Control 2
- For the convertible top cover
- Cannot be replaced separately
- Bolt
- 2 Nm
- Bolt
- 2 Nm
- Chafe Protection
- Bolt
- 2.5 Nm